Intec TURBO FORCE HP2 Instruction Manual page 8

2. Activate System from either Electrical Panel, Wireless Transmitter, or Wired Remote. This can
be achieved by rotating the Rotary Switch to the desired operation.
3. By turning the Rotary Switch one position to the right to Blower will turn on Blower #1.
Turning the Rotary Switch one more position to the right (Blower/Agitator) will turn on the
Agitator. This is known as Panel Controlled.
a. Blower #2 can now be turned on if desired by pressing the Green/Red Switch located in
the bottom right corner.
T: 303-833-6644
Original Language - English
800-666-1611
or
Instruction Manual
Variable Speed Button (Green
indicating "ON")
Power ON Button;
Will not be illuminated
prior to being turned on
Rotary Control Switch: Must be in
"WIRED" position to use a wired
remote. Must be in "WIRELESS
REMOTE" position to use Wireless
remote
Variable Speed turned "OFF" (RED)
www.inteccorp.com
| 7