Intec TURBO FORCE HP2 Instruction Manual page 11

5. Wait approximately 17 seconds for the Sync LED to stop flashing. Learn Button should return to
a steady flashing blue light.
6. Re-Syncing is now complete.
Loading Insulation -- Remove packaging and load insulation.
1. Place the Loading Platform in down position by first lifting up, then rotating downwards to
rest on top of the system's handle.
Lift loading platform up
A. Cellulose:
Set bag on platform & remove plastic wrapping.
Be sure no plastic goes into hopper.
NOTE A1: Orientation of bag is important to
ensure smooth material processing and to limit
product bridging from occuring. Product bridging
is when product is in the hopper, yet it is not
being consumed by the agitator into the airlock
and out the blowing hose. The main cause of
product bridging occurs is improper feeding of
insulation into the hopper.
NOTE A2: When loading cellulose, do not load in
the following manners as these will cause product bridging:
T: 303-833-6644
Original Language - English
800-666-1611
or
Instruction Manual
swing loading platform down
www.inteccorp.com
| 10