Intec TURBO FORCE HP2 Instruction Manual page 19

Problem
Wireless remote not controlling
system as desired. Pressing 'on'
and blower or agitator not
turning 'on'; or pressing 'off'
and blower or agitator not
turning 'off'.
Blower and agitator continue to
run and wired/wireless remotes
do not control system.
T: 303-833-6644
Original Language - English
Likely Cause
Reception range less than
desired.
Antenna –in the down position
Control Panel needs to be re-
set.
800-666-1611
or
Instruction Manual
Remedy
If TURBO FORCE system is in a
trailer or truck, make sure the
trailer or truck's doors –
especially the large door in back
-- are open to allow for radio
frequency waves to easily enter
and access the receiver in the
blowing machine.
Extend Antenna straight out
from panel.
Install the auxiliary antenna
provided with your system.
Contact Intec for parts.
Prior to connecting corded
remote, all switches must be in
the "OFF" position.
www.inteccorp.com
| 18