Intec TURBO FORCE HP2 Instruction Manual page 12

B. Fiberglass or Stone Wool:
Score bag in ½
NOTE B1: Orientation of bag is important to ensure smooth material processing and to limit product
bridging from occuring. Product bridging is when product is in the hopper, yet it is not being consumed
by the agitator into the airlock and out the blowing hose. The main cause of product bridging is
improper feeding of insulation into the hopper.
NOTE B2: When loading fiberglass or stonewool, do not load in the following manners as these will
cause product bridging:
T: 303-833-6644
Original Language - English
bend up to break in ½
800-666-1611
or
Instruction Manual
Place ½ bag on loading platform
with open end facing towards a side
& not into the hopper. Slice wrapper
in direction shown to allow product
to expand into hopper. Keep plastic
out of hopper.
www.inteccorp.com
| 11