Intec TURBO FORCE HP2 Instruction Manual page 10

Wireless Remote Operations: To utilize the Wireless Remote feature of your system, unplug your
wired remote and place the Rotary Control Switch in the "WIRELESS REMOTE" position.
The "Wireless Remote" has 1 button for the Blower(s) and 1 button for the Agitator. Press to turn
on/off. Note: The Blower(s) must be running for the Agitator to turn on.
Steps to Re-Sync your Wireless Remote to your Receiver:
1.
System must be plugged in.
2.
Rotate Rotary Control Switch to "Wireless Remote" position. (Learn Button should have a steady blue
flashing light)
3. Press "Learn Button" (Sync LED will begin flashing green rapidly. Learn Button will illuminate a
solid blue light.)
4. On your Wireless Remote, press your Blower Button, then your Agitator Button.
T: 303-833-6644
Original Language - English
800-666-1611
or
"SYNC LED" will only illuminate (green) when
re-programming the Wireless Remote to the
Wireless Receiver
"LEARN BUTTON" ring will continuously flash
blue indicating wireless receiver is working when
Rotary Control Switch is in the "Wireless Remote"
position.
Instruction Manual
www.inteccorp.com
| 9