Type Labels And Component Numbers - Wacker Neuson 50Z3 Operator's Manual

1.12 Type labels and component numbers

Fig. 2: Type label: location
Fig. 3: Type label (symbolic representation)
Fig. 4: Cab type label (up to serial no. AH02781)
Fig. 5: Cab type label (from serial no. AJ02777)
BA 50Z3/6003 en – Edition 4.3 * 5003b110.fm
Serial number
The serial number is stamped on the machine chassis. It is also located on the type label.
The type label is located at the front left on the machine chassis (at cab level)
Type label information
Example:
Type label information (example):
Field below Wacker Neuson logo:
Fahrzeug Seriennummer/serial no./no. de série:
Fahrzeug Modell/model/modèle:
Leistung/performance:
Typ/version:
Betriebsgewicht/operating weight/poids en charge:
Transportgewicht/transport weight/poids en transport:
G. Gew./GWR/PTAC:
Max. Nutzlast/max. payload/max. charge utile:
Zul. Achslast vorne/front GAWR/PNBE AV:
Zul. Achslast hinten/rear GAWR/PNBE AR:
EWG Nr./CEE no.:
Baujahr/model year/année fabr.:
Other information – see chapter 6
Cab number
The type label (arrow) is located in the cab, on the upper rear right chassis member.
The type label is located on the chassis of the cab, at the upper left beside the door.
50Z3
HYDRAULIC EXCAVATOR
Serial number of machine
Machine designation
Engine output
Machine type
Operating weight
Transport weight
Gross weight rating (admissible)
Maximum payload
Front gross axle weight rating
Rear gross axle weight rating
EEC check number
year of construction
Specifications on page 6-1
Introduction
1-15