Type Labels And Component Numbers - Wacker Neuson 803 Operator's Manual

1.11 Type labels and component numbers

Fig. 1: Type label: location (symbolic representation)
Fig. 1: Type label (symbolic representation)
Fig. 2: ROPS bar type label (symbolic representation)
Fig. 3: Diesel engine number (symbolic representation)
OM 803 us – Edition 3.7 * 803b110.fm
Information!
Type, quantity and position of the labels depend on options, country and machine.
Serial number
The serial number is stamped on the machine chassis. It is also located
on the type label.
The type label is located at the front right on the machine chassis (at control stand level).
Type label information (example):
Machine designation:
Model:
Model year:
CEE no.:
Output:
Serial no.:
Max. payload:
GWR:
Operating weight:
Front GAWR:
Transport weight:
Rear GAWR:
Version:
Other information – see chapter 6
ROPS bar type label
The type label is located at the front right, on one side of the rollbar.
Engine number
The type label is located on the cylinder-head cover (engine).
HYDRAULIC EXCAVATOR
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
Technical data on page 6-1
Introduction
1-9