Table of Contents
Advertisement
1 GENERAL
1.1 GENERAL INFORMATION
Thank you for purchasing PACKO products!
This manual for the ZP series Circumferential Piston Pumps describes safe and appropriate operation
during operating and in all life cycles.
This manual contains instructions for installation, operation, disassembly and assembly, maintenance
procedures and troubleshooting.
Read and completely understand this manual to learn how to service these pumps prior to operating
or servicing the product and observe to pay special attention to the warnings.
This manual must always be available at the installation location since no liability will be assumed for
any damage or operational malfunctions arising from non-compliance with these operating
instructions.
1.2 MANUFACTURER
PACKO INOX LTD
Cardijnlaan 10
B-8600 Diksmuide
Belgium
Telephone: + 32 51 51 92 80
Telefax: + 32 51 51 92 99
E-mail:
pumps@packo.com
1.3 COPYRIGHT
These operating instructions are written to support the installation, the use and the maintenance of
the pump in accordance with the European machinery directive. They are originally written in Dutch,
English, French and German by the manufacturer. All other languages are translations of the original
operating instructions.
PACKO INOX LTD has the copyright on this document. These operating instructions may be
reproduced in full in the operating instructions of the machine or installation in which the pump is
installed and may be used for training personnel who must work on or with the pump. Any other
publication, reproduction in full or parts thereof is prohibited.
Although these operating instructions have been carefully drawn up, they do not however cover all
possible eventualities that can occur during the installation, operation or the maintenance of the
pump. In any event, the pump must not be used for purposes other than those stated when ordering
and for which the pump has been constructed, as this could result in physical damage and injuries.
2
Advertisement
Table of Contents
