Declaration Of Conformity - VERDER Packo ZP Series Instruction Manual

1.4 DECLARATION OF CONFORMITY

Declaration of conformity according to annex IIA of the "Machinery"
Directive 2006/42 EC
We,
Packo Inox Ltd
Cardijnlaan 10
B-8600 DIKSMUIDE
BELGIUM
confirm that the Packo pump type ......................................, with serial number ..........................
fully complies with the Directive Machinery and with the (harmonised) standard EN 809,
ENISO12100.
It must be brought to your attention that our product is intended to be built into a machine, and
that, on the basis of the "Machinery" Directive, the complete (compound) machine can only be
applied after matching the stipulations of the European demands.
PACKO Inox Ltd, Cardijnlaan 10, B-8600 DIKSMUIDE, BELGIUM is authorized to make up the
technical construction file.
Date
.............................
Signature:
.............................................................................................................................
Wim Bonte
BU Manager pumps
Packo Inox Ltd
3