GPS SYNC (GPS synchronization)
Touch Panel Calibration
◎Touch position correction
DIMM Offset
◎Make fine adjustments to the LCD default dimming.
・ Touch
the settings will be displayed.
Set content:OFF/ON
OFF:An internal clock is used.
ON:When an internal clock and the ZDA data have shifted
for 30 seconds or more by using the ZDA sentence,
an internal clock is corrected.
・ Change the settings with
・ After setting, touch
・ Touch
and the calibration screen will be displayed.
・ The
on the screen turns red in the order of top left → top right →
bottom left → bottom right → center, so touch them in order.
・ Touch
and the settings will be displayed.
・ Change the setting contents by entering a numerical value or
・ Dimm offset can be set up from -512 to 512 by 1 unit.
・ After setting, touch
4-17
,
.
.
.
,
4. Operation