Table of Contents
Advertisement
1. On/off button
Using the on/off button, the electrical system
can be switched on or off.
Switching on: Push the button briefly.
•
Switching off: Push the button for
•
two seconds.
After the system is turned on, the electric motor is active in level 1.
When the system is not used, it will automatically turn off after a certain time.
Always turn off the electric system before getting on and off the bike, and when
you are walking while holding the bike.
Make sure that the switch under the luggage carrier is
always pressed toward the side where the battery is
located. Note that with some models the battery
switch has a middle (neutral) position as well. That
means the battery is switched off.
2. Degree of support 1, 2 and 3
The desired support can be set by using one of the support
levels 1, 2 or 3.
1.
Light support, maximum range.
2.
Average support, average range.
3.
Maximum support, low range.
You can change the level while cycling.
Version 21.01
20/51
Advertisement
Table of Contents
