Table of Contents
Advertisement
Make sure that once the wheelchair is placed on the ramp, the wheelchair's
weight causes the ramp to fold up automatically. When that is the case, the
centre of gravity of the wheelchair is situated above the front wheels of the
bicycle. This creates the correct weight distribution of the bicycle.
6. Next, turn the star knob to tighten the
belts.
7. Finally fasten the safety belt of the
passenger.
8. Replace the safety pin in the coupling.
To remove the wheelchair from the bike,
follow these steps in reverse order.
Caution: Stop the wheelchair when you release the hooks so that it will
not roll off the ramp.
Version 21.01
6.
7.
8.
11/51
Advertisement
Table of Contents
