Usage; Powering Up/Down Remote - Invacare LiNX DLX-REM400 User Manual

5 Usage

5.1 Powering Up/Down Remote

Powering Up Remote
1.
Press ON/OFF key A.
Start screen lights up.
The status LED inside the ON/OFF button lights up green, if
no fault is present at power up. After a few seconds display
is ready to use.
If there is a fault with the system when powering up, the
status LED indicates the fault with a series of red flashes,
also a fault icon is displayed in the status bar. For more
1637423-H
Fig. 5-1
Fig. 5-2
information about fault indication, refer to 7.1.1 Fault Codes
and Diagnosis Codes, page 119 .
Powering Down Remote
1. Press ON/OFF key A.
Shut down screen is displayed.
After a few seconds the remote is powered down.
Attendant in Charge
Fig. 5-3
Fig. 5-4
Usage
23