Configuring Odometer - Invacare LiNX DLX-REM400 User Manual

Invacare® LiNX
Entry Function
C Left Hand Toggle between right-hand and
Mode left-hand usage of remote.
When the switch is set to ON, all
user controls (navigation button,
speed slider, lighting controls etc)
are displayed and operable from the
left-hand side of the screen.
Connectivity
For more information about connectivity settings, see 5.20.1
Configuring Connectivity Card, page 76.

5.2.5 Configuring Odometer

A Total distance meter
B Trip meter
C Reset button
30
Fig. 5-23
D Units selector
E Back
The total distance meter shows the cumulative value of all
trips.
The total distance meter cannot be reset from this
screen. Contact your provider to reset this value.
The trip meter displays the current trip value. This is the
value that is displayed on the drive cards.
Resetting Odometer
1.
Tap and hold navigation button A to open Menu screen.
2. Tap on Odometer button.
3. Tap on Reset to zero to reset trip value.
Fig. 5-24
1637423-H