Invacare LiNX DLX-REM400 User Manual page 120

Invacare® LiNX
Fault Fault description
icon
Remote fault
Network or
configuration fault
Motor 1 1 fault
Motor 2 fault
1
Left magnetic
brake fault
120
Possible action
• Check cables and
connectors.
• Contact your provider.
• Check cables and
connectors.
• Recharge the batteries.
• Check charger.
• Contact your provider.
• Check cables and
connectors.
• Contact your provider.
• Check cables and
connectors.
• Contact your provider.
• Check cables and
connectors.
• Check left magnetic
brake is engaged.
• Refer to the chapter
"Pushing the mobility
device in freewheel
mode" in the user
manual of your
wheelchair.
• Contact your provider.
Fault Fault description
icon
Right magnetic
brake fault
Module fault
(other than
remote module)
1 Configuration of the motors depending on the
wheelchair model
Possible action
• Check cables and
connectors.
• Check right magnetic
brake is engaged.
• Refer to the chapter
"Pushing the mobility
device in freewheel
mode" in the user
manual of your
wheelchair.
• Contact your provider.
• Check cables and
connectors.
• Check modules.
• Recharge batteries.
• If the chair was
stalled, reverse away
or remove obstacle.
• Contact your provider.
1637423-H