Selecting Functions; Function Change Inhibits; Using Direct Navigation - Invacare LiNX DLX-REM400 User Manual

Changing Units
1. Tap on units selector D to change displayed units. mi
for miles, km for kilometres.
2. Tap on button E to go back to Menu screen.
3.
Tap on button E to close Menu screen.
The units can also be set through the display
configuration settings, see 5.2.4 Configuring Settings,
page 28.

5.3 Selecting Functions

You can locate and select a function card by navigating
through the programmed profiles and functions. There are
different ways of navigation that can be used, depending on
your needs and abilities. These methods fall into two groups:
• direct navigation and
• indirect navigation.
1637423-H
Fig. 5-25
How to navigate through the LiNX system depends on how
the navigation button is configured. Refer to 3.3 Navigation
button, page 15, for more information about the possible
configurations.

5.3.1 Function Change Inhibits

Function change blocked is a safety feature that prevents
accidental driving or seating movements, when:
• a function change should be carried out during the user
performs an action on the active function.
The user must finish his current action to change the
function. Otherwise a function change blocked overlay is
displayed.

5.4 Using Direct Navigation

Direct navigation allows you to select a function by traversing
the system's profiles and functions using the touch screen
or other programmed switches attached to control inputs.
There are different direct navigation methods available:
Fig. 5-26
Usage
31