Mounting The Coping Support Brackets - Procopi ODYSSEA RECTANGLE Installation Instructions Manual

»
INSTALLATION INSTRUCTION
Figure 18
Figure 19
725
56
/ RECTANGLE

MOUNTING THE COPING SUPPORT BRACKETS

> >
Refer to the diagram that corresponds to your pool before mounting the wooden
w
support brackets. Use the 5x100 SS screws from bag L to fasten them in position. The
brackets should be installed 3mm down from the top of the wall (fi g. 21). To ensure that
the brackets are correctly positioned use the support bracket plates that will be fastened
to the brackets, these should be fl ush with the top of the wall. Before screwing the
plates into position, lightly mill the central holes through which the screws (5x40) will be
inserted.
725 725 700
725 700 700
700
475 475
bassin 3x6
Pool 3x6
bassin 4x8
Pool 4x8