Mounting The Metallic Fi Ttings - Procopi ODYSSEA RECTANGLE Installation Instructions Manual

»
INSTALLATION INSTRUCTION
CAUTION
The coping support
fi ttings are
designed to hold
the coping modules
and fi x them in
position.
58
/ RECTANGLE
MOUNTING THE METAL FITTINGS
> >
Figure 22
Place the metal fi ttings that will hold the coping on top of the posts. Make sure that
w
they are fl ush with the top slat and that they are aligned with each other and with the
support bracket plates along the lengths of the wall. Use the 6x30 Torx screws from
bag E.
Figure 24
In the corners, use the remaining left and right fi ttings and 4 corner
w
brackets.