AXIS Audio Manager Pro
Get started
Get started
Installation
Install AXIS Audio Manager Pro:
1. Go to axis.com/products/axis-audio-manager-pro.
2. Download and run the installation file.
3. Select a certificate and click Next.
-
If you don't have a certificate, then select Self-signed certificate.
Note
When using a self-signed certificate you will be prompted the first time you start AXIS Audio Manager Pro 4 and asked to add
a security exception in your browser. All you need to do is to accept the security exception and you will not be prompted again.
If you want to replace your certificate in the future, go to System settings > Security in the web client.
For more information about certificates, see Certificate management.
4. Click Finish.
Start the application
1. On the Windows system tray, click
2. Enter password and log in.
Configure the network
All devices must be connected to the same multicast domain as the server that AXIS Audio Manager Pro is installed on.
Audio streaming between the server and all the devices use multicast. The default range is 239.0.0.0 - 239.0.0.254.
Make sure you have reserved enough bandwidth. The maximum consumption for each multicast stream is 443 kbps.
Port
443
5433
6992
6999
6999
>
UDP
TCP
x
x
x
x
x
> Open AXIS Audio Manager Pro Client.
Adjustable
x
x
4
Description
1
Web UI
2
System port
3
System port
System port
System port (multicast
audio streaming)