2
To remove the nozzle from the burn chamber place the MAGICFX FLAMEBLAZER
Nozzle exchange tool over the hex head of the nozzle being careful not to touch
or miss-align the ignition probes.
NOTICE
3
With the MAGICFX FLAMEBLAZER
continuous anti-clockwise rotation will result in the nozzle becoming free from the
bulkhead.
This can be lifted out of the burn chamber and the nozzle exchange tool should
retain the nozzle with the internal sprung clip.
WARNING
20
MAGICFX FLAMEBLAZER
The machine should be on level ground and the burn chamber
clean of foreign objects and materials.
®
Eye contact with fuel under pressure from the machine can lead
to serious eye injury. Always wear eye protection when you
change the nozzle.
— User and Installation Manual
®
Nozzle exchange tool held in a vertical position,
®