Magicfx FLAMEBLAZER User And Installation Manual page 17

Missing or obscured safety symbols on the machine can lead to
WARNING
death or serious injury. Make sure all safety symbols are correctly
in place, see section 2.3.
The flame output burn chamber and enclosure heats up during
CAUTION
operation and can cause burns when touched. Do not touch
any metal parts of a (recently) triggered machine.
Any material that blocks the output nozzle can result in injuries,
CAUTION
fire and damage to the machine when the machine is used.
Always inspect the nozzle before operating and remove any
obstructing material.
Only open the enclosure access lid when the machine is not
CAUTION
powered.
The MAGICFX FLAMEBLAZER
CAUTION
exceeding 20 m/h or 32 km/h.
Always keep the machine dry and do not let excessive amounts
NOTICE
of liquids such as rain or snow wet the machine.
should not be used in winds
®
MAGICFX FLAMEBLAZER
— User and Installation Manual
®
17