MAGIC FX is also Europe's largest supplier of high quality and fireproof confetti products and streamers. We keep a large inventory in stock so we can deliver speedily and at the lowest prices. MAGICFX® products are used by special effects professionals around the world and distributed by a dealer network across 58 countries.
Version 1.0 2. CE MARKING NOTE: We must assume that you, your employees and others who use or come into contact with the machine are familiar with how the machine should be utilized. This specifically pertains to the proper use, maintenance and repair of the machine as described in this user manual.
User Manual MAGICFX® Stage Flame 3. DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY (according to Annex IIA of the Machinery Directive) With respect to the Machinery Directive. MAGIC FX B.V. Schouwrooij 27 5281 RE Boxtel The Netherlands Hereby declares under our sole responsibility: We are the manufacturer of the product: ®...
Version 1.0 4. FOREWORD This manual provides pertinent information about the MAGICFX® Stage Flame. The information in this manual is important with respect to the proper and safe operation of the Stage Flame. If you are not familiar with the installation, operation, preventive maintenance, etc., of the Stage Flame then read this manual in its entirety.
User Manual MAGICFX® Stage Flame TABLE OF CONTENTS CONGRATULATIONS! ..................1 CE MARKING ....................2 DECLARATION OF CONFORMITY ..............3 FOREWORD ....................4 INTRODUCTION ....................6 DESCRIPTION OF THE STAGE FLAME AND ITS USAGE ..........6 NECESSARY ACCESSORIES ....................6 TYPES OF GAS ........................
Version 1.0 5. INTRODUCTION DESCRIPTION OF THE STAGE FLAME AND ITS USAGE The Stage Flame is a device specifically designed for producing flames on stage. The Stage Flame is intended solely to be placed on a flat surface or stage and produce brief upward flame effects (fire balls).
User Manual MAGICFX® Stage Flame CHOICE OF FLAME The following types of flames are possible (at a normal ambient temperature of 20°): AEROSOL CAN: Flame height approximately three meters high GAS BOTTLE: Flame height approximately three to four meters high...
Always ask the fire brigade for permission to use the Stage Flame at the desired location. EMERGENCY STOP BUTTON The Stage Flame is equipped with an emergency stop button (MFX1201) in case of emergencies. The Emergency Stop Button has the following characteristics: The emergency button is easy to recognize because of its red/yellow colors and should be positioned so that it can be reached easily and quickly.
User Manual MAGICFX® Stage Flame WARNINGS There are several warnings displayed on the Stage Flame to which the following restrictions apply: The text must not be removed or otherwise spoilt. The operator should regularly check that the warnings are in good condition.
Version 1.0 Icons Explanation A warning for danger from a hot surface must be indicated using the PIC 315 icon. This is located on the top of the Stage Flame. PIC 315 Hot surface Icons Explanation A warning for danger for fire must be indicated using the PIC 300 icon.
NL-5281 RE BOXTEL The Netherlands Tel: +31(0)411 63 50 13 Fax: +31(0)411 63 50 12 Web: http://www.magicfx.eu Email: info@magicfx.eu 9. PREPARATION FOR USE Unpack the Stage Flame. Dispose of packaging material without causing harm to the environment. Check the device for any possible damage. You must report any damage to the device to MAGIX FX.
This indicates that the equipment may be damaged if procedures are not carried out in the proper manner. DANGER WARNING: The MAGICFX® Stage Flame may only be worked on by authorised adults. Prepare the Stage Flame for use as follows: Place the Stage Flame on a flat, solid, and stable surface.
Page 15
Version 1.0 Connect the other end of the DMX cable (male plug) to a professional DMX controller. Ensure that the DMX controller is placed so that the operator always has a complete view of all the connected Stage Flames. Consult the DMX controller manual for usage and safety instructions.
Page 16
User Manual MAGICFX® Stage Flame Screw the aerosol can into the holder until it is securely locked in place. Ensure that it is securely in place. Only replace an aerosol can during a show when the Stage Flame is set to “safety mode”.
Page 17
Version 1.0 Connect a propane gas hose to the reducer. All propane hoses in our selection come standardly equipped with quick release connectors. Flame height can also be controlled by adjusting the reducer. The bolt on the reducer should be turned in completely to maximize the flow of gas and create the biggest possible flame.
Page 18
User Manual MAGICFX® Stage Flame The Stage Flame settings should be selected only after all the connections are completed and the gas bottle and/or aerosol can is installed. When readying the device, ensure that free channels are used on the DMX controller and that these channels are in safety mode.
Page 19
Version 1.0 After you have set the “safety” channel, you can set the “fire” channel. You select the desired channel by using the UP and DOWN buttons. If you have selected the “Big Flame” option then you must set two channels in this step. You can set “small”...
This indicates that the equipment may be damaged if procedures are not carried out in the proper manner. DANGER WARNING: The MAGICFX® Stage Flame may only be operated by authorised adults. The Stage Flame may only be operated if all parts are entire and in good working order and properly connected/installed.
Page 21
Version 1.0 After you have used the Stage Flame, you must set it to safety mode again. You put the Stage Flame in safety mode by shutting the safety channel or setting it to a value outside the 40% to 60% range. The Stage Flame cannot be used when it is in safety mode.
User Manual MAGICFX® Stage Flame 12. TURNING OFF Turn off the Stage Flame as follows: Ensure that the DMX addresses are set to safety mode. Turn off the Stage Flame power button and disconnect the powerCON cable and DMX plugs.
Version 1.0 13. TROUBLESHOOTING Always contact your dealer or the MAGIC FX technical department if you have any doubts or questions about the operation of or other issues related to the Stage Flame. 14. TECHNICAL SPECIFICATIONS 360mm (14.2”) Length: 310mm (12.2”) Dimensions Breadth: 210mm (8.3”)