Upgrading The Firmware - Axis 5570e User Manual

Section 13

Upgrading the Firmware

Note:
Upgrading from the
Print Server's Internal
Web Pages
Upgrading using
AXIS ThinWizard
AXIS 5570e / AXIS 5670e User's Manual
Upgrading the Firmware
You can upgrade the AXIS 5570e/AXIS 5670e firmware using one of the
following methods:
• AXIS ThinWizard (TCP/IP)
• From the print server's internal Web pages (TCP/IP)
• FTP (TCP/IP)
Updating instructions are supplied with the firmware release notes.
Follow these instructions to upgrade the firmware of your print server
from its internal Web pages (flash loading over the Web):
1. Open your Web browser, enter the IP address of your print server and
press Enter. (See "Using a Web Browser for Print Server Management" on
page 128 for detailed instructions on accessing your Axis print server on
the Web).
2. From the Admin mode, click the Firmware Upgrade button. From here you
can upgrade your print server with the latest available firmware.
AXIS ThinWizard 3.0 is a tool that enables batch upgrading of several
print servers and can be used for upgrading the print server's firmware in
TCP/IP networks.
Follow the instructions below to upgrade your print servers using AXIS
ThinWizard:
1. Log in to AXIS Thin Wizard.
2. Open the Network Group that contains the print server to be upgraded.
3. Click the Firmware button. The Firmware Wizard starts.
4. Browse through the upgrading tips and click Next > when you are done.
Select Latest Available Version. Click Next >.
5. Select the servers you want to upgrade, by checking the correct upgrade
boxes. Click Next >.
6. Enter the default User ID and Password of the servers you selected in the
previous step. Select whether you want AXIS ThinWizard to verify the
password immediately or when the upgrading job has started, by checking
the appropriate box. Click Next >.
Upgrading the Firmware
169