Configuration Possibilities; Section 12 Configuration Possibilities; Autodetect Printer Type; Auto-Ip - Axis 5570e User Manual

Configuration Possibilities

Section 12 Configuration Possibilities

Autodetect Printer Type

Auto-IP

144
This section describes some special features offered by the AXIS
5570e/AXIS 5670e:
Autodetect Printer Type, on page 144
Auto-IP, on page 144
Changing Language in the Print Server's Web Interface, on page 145
E-mail Notification, on page 145
Flash Loading of Firmware over the Web, on page 162
IPP (Internet Printing Protocol), on page 146
Logical Printers for Customized Printing, on page 154
Network Speed, on page 161
NetWare Packet Signature Levels, on page 162
Overriding Port Status, on page 168
TCP/IP Restrictions, on page 163
Enabling Secure Web Services — SSL/TLS, on page 164
The print server can automatically detect the type of printer you are using
if you enable Autodetect Printer Type. The print server can then
recognize Epson and Hewlett Packard InkJet printers. Most Epson and
Hewlett Packard InkJet printers that have Mac OS printer drivers for
network printing are supported. If Autodetect Printer Type is disabled,
the AppleTalk printer type has to be specified manually in the print
server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it
would be "DeskWriter". If the print server does not recognize the
connected printer the default setting, "LaserWriter" will be used as printer
type. "LaserWriter" is the recommended setting to be used with all
PostScript printers.
To enable Autodetect Printer Type, log in to your print server's Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server's Web interface for details.
In the absence of an IP address management mechanism such as DHCP,
the print server will receive a temporary IP address automatically over
AXIS 5570e / AXIS 5670e User's Manual