Axis 5570e User Manual page 46

Setting Up - IBM Mainframe (zSeries)
NetWare for
SAA Server
46
Notes:
• You can check the status of the TN3270E connection by printing a test page from the Print
Server. This is done by pressing the test button once. Make sure the TN3270E status (St:) line
for your server connection is defined as either:
• SSCP
• LU-1
• LU-3
• For additional information about configuring other TN3270E servers, refer to the Technical
Notes on www.axis.com
To set-up a TN3270E connection to the Axis Network Print Server you
have to set up PU and LU definitions. This is done by following the steps
below:
1. Start the NWSAA Administrator.
2. Double-click the NWSAA Node. The panel below will appear.
3. Enter the Node ID for the host.
4. Leave the rest at their default settings.
5. Click the TN3270 icon. The panel below will appear.
6. Select All Available Host PU profiles.
7. Enter the user name, from the User List, that you want all TN3270 clients
to use.
8. Specify the maximum number of TELNET connections you want to allow
each TN3270 client.
Peer PU profile
AXIS 5570e / AXIS 5670e User's Manual