Axis 5570e User Manual page 158

Configuration Possibilities
PostScript Settings
Example:
158
job is searched and if any ASCII data is found, it is translated into
PostScript. This setting is recommended if you are not sure if the print
data is ASCII or PostScript.
When a logical printer is set for PostScript conversion, you must specify
the following:
• page size
• page orientation
• page format
• which font to use
The default page size is A4 and the default page orientation is Portrait,
while the page format parameters are as follows:
Page Format Parameter
Lines per page (MPL)
Characters per line (MPP)
Characters per inch (CPI)
Lines per inch (LPI)
Left margin (LM)
Top margin (TM)
The PostScript font can be any font that is installed in the printer. If no
font is specified, Courier will be used.
Follow the instructions below to set the PostScript parameters for logical
printer PR2:
1. From the print server's internal Web page, select Admin | Logical
Printers.
2. Select the PR2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Set the PostScript Page Size parameter to LETTER.
5. Set the PostScript Page Orientation parameter to LANDS.
6. Enter the string 48 0 120 60 30 50 in the PostScript Page Format text field.
Hex code
48
0
120
60
30
50
7. Enter the string Helvetica in the PostScript Font text field.
8. Click the OK button.
Default Value Comment
66
0 0 = disable line wrap
100 100 = 10 char per inch
60 60 = 6 lines per inch
30 30 = 3.0 mm
50 50 = 5.0 mm
Explanation
48 lines per page
disable line wrap
120 = 12 characters per inch
60 = 6 lines per inch
30 = 3 mm left margin
50 = 5 mm top margin
AXIS 5570e / AXIS 5670e User's Manual