Axis 5570e User Manual page 61

AXIS 5570e / AXIS 5670e User's Manual
Example continues
CONT...
//* ************************************************************
//* PRINTDEV
//* ************************************************************
//PRT1 CNTL
//PRT1 PRINTDEV FONTDD=*.FONT01, /* 240 PEL FONT LIBRARY DD
//*
//*
//*PRT1 PRINTDEV FONRDD=*.FONT02, /* 300 PEL FONT LIBRARY DD
//*
//*
// OVLYDD=*.OLAY01,
// PSEGDD=*.PSEG01,
// PDEFDD=*.PDEF01,
// FDEFDD=*.FDEF01,
// JOBHDR=*.JOBHDR,
//*
// JOBTRLR=*.JOBTLR,
//*
// DSHDR=*.DSHDR,
//*
// MESSAGE=*.MSGDS,
// BUFNO=5,
// PAGEDEF=A06462,
// FORMDEF=A10110,
// CHARS=(GF10,
// GS10,TU10,GU10),
// PIMSG=YES,
//*
// DATACK=BLOCK,
//*
// TRACE=NO,
// FAILURE=WCONNECT,
//*
// TIMEOUT=REDRIVE,
// MGMTMODE=IMMED,
// DISCINTV=40,
//*
// IPADDR='xxx.xxx.xxx.xxx'
ADDRESS */
// PORTNO='5100',
//PRT1 ENDCNTL
Although it is not recommended, it is possible to drive the printer with
just one FSA, if one of the following conditions are met:
• All the resources in the resource libraries are resolution-independent,
and all the jobs that use inline resources or user libraries contain
resources that are resolution-independent.
• All jobs that request a resolution that is different from the resolution-
dependent resources in the PSF system and security libraries contain the
resources at the requested resolution, either as inline resources or in the
user's library.
Even if a PSF user requests 120-pel resolution for an AFP print job being
sent to the printer, PSF requires 240-pel resources from the library. Do
not store 120-pel resources in the library.
Setting Up - IBM Mainframe (zSeries)
/* <-- SEE REQUIRED ACTIONS
/* ABOVE
/* <-- SEE REQUIRED ACTIONS
/* ABOVE
/* OVERLAY LIBRARY DD
/* SEGMENT LIBRARY DD
/* PAGEDEF LIBRARY DD
/* FORMDEF LIBRARY DD
/* JOB HEADER SEPARATOR
/* OUTPUT
/* JOB TRAILER SEPARATOR
/* OUTPUT
/* DATA SET HEADER
/* SEPARATOR
/* MESSAGE DATA SET OUTPUT
/* NUMBER OF WRITE DATA BUFFERS*/
/* DEVICE PAGEDEF DEFAULT
/* DEVICE FORMDEF DEFAULT
/* DEVICE
/* DEFAULT FONT SET
/* ACCUMULATE DATA SET
/* MESSAGES
/* REPORT ALL DATA-CHECK
/* ERRORS
/* CREATE INTERNAL TRACE
/* PSF ACTION ON PRINTER
/* FAILURE
/* PSF ACTION ON TIMEOUT
/* PRINTER MANAGEMENT MODE
/* DISCONNECT INTERVAL IN
/* SECONDS
/* Axis Network Print Server IP
/* TCP/IP PORTO
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
61