Axis 5570e User Manual page 181

AXIS Cobra products
compatibility
AXIS 5570e / AXIS 5670e User's Manual
• width is the bar code module width in 1/1000 inch. Valid range is 1 to
1000. The default value is 12.
• height is the bar code element height in 1/24 inch. Valid range is 1 to
500. The default value is 12.
text mode selects if human readable text is printed under the bar code
•
or not. 'YES' or 'ON' will turn on text, 'NO' or 'OFF' will turn off text.
The default mode is 'ON'.
• check mode selects if a check digit will be generated or not. 'YES' or
'ON' will generate a check digit, 'NO' or 'OFF' will not generate a check
digit. The default mode is 'ON'. The check digit will always be generated
for bar code types UPCA, EAN8 and EAN13, regardless of the setting of
check mode.
To set up the BAR parameter, use the
document. To print bar codes, bar code commands may be included
anywhere in your documents. They begin with 'percent-slash' (
followed by the word BAR. Then follows the number of the bar code
definition to be used, a comma, and the sequence to be printed. The
command is ended by a semi-colon (;).
Setting up the bar code parameters and printing bar codes
%CONFIG+
BAR 0 = EAN8,12,4,ON;
BAR 1 = EAN8,12,8,ON;
SAVE;
%CONFIG-
%/BAR 0,"0123456"; %/BAR 1,"0123456";
Once the BAR parameter has been set up, you will only need to use the bar
code commands to print the bar codes
%/BAR 0,"0123456";
Resulting printout:
0123 4565
The Axis Network Print Server supports a subset of the extended printer
emulation syntax of the AXIS Cobra products, including the bar codes
syntax. For more information, please refer to the AXIS Network Print
Server Technical Reference supplied on the AXIS Network Product CD.
Extended IBM Printer Emulation
command in your
%CONFIG
%/BAR 1,"0123456";
0123 4565
)
%/
181