Axis 5570e User Manual page 214

Technical Specification
Network Connection
Printer Connection
AXIS 5570e
AXIS 5670e
Hardware
Processor
Memory
Front Panel
Power Consumption
214
All standard Ethernet and Fast Ethernet networks: RJ-45 connector
(Category 5 or 6, shielded twisted pair cable) for 10baseT or 100baseTX
Ethernet with full duplex
Supports: IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types
simultaneously
NWay for autodetection of network speed
Bi-directional support for Apple EtherTalk, Reverse Telnet and PROS
Parallel: 36-pin Centronics connector, high-speed IEEE 1284 compliant
with ECP support and throughput of 1 MB/sec
USB: USB 1.1 Low and Full speed. Successfully tested with USB 2.0
Printers
Note: If the AXIS 5570e is powered from the printer via the parallel port
(i.e. instead of via the Power Adapter), the USB port will be switched off.
To make both ports work, use the Power Adapter supplied with the print
server.
Parallel: Two 25-pin DSUB parallel ports, high-speed IEEE 1284
compliant with ECP support and throughput of 1 MB/sec
Serial: One 9-pin DSUB connector, RS-232, XON/ XOFF or RTS/CTS, data
rates up to 115,200 baud
AXIS Etrax 100LX 32-bit 100 MHz RISC
2 MB Flash, 8 MB RAM
2 LED indicators: Power and Network
Test button for information printouts
Power provided by external supply. Maximum 5.6W (Type PS-H, 5.1 VDC
2000mA)
AXIS 5570e / AXIS 5670e User's Manual