Axis 5570e User Manual page 139

Printing Hexdumps
Telnet Help
AXIS 5570e / AXIS 5670e User's Manual
The Axis Network Print Server allows you to record a trace of the
communication between the Axis Network Print Server and the host.
The Axis Network Print Server supports hexdump printing for the SNA,
TN3270E, TN5250E, LPR/LPD and Raw TCP/IP printing protocols. Please
refer to "Protocols and Datastreams" on page 9 for details on the
supported protocols.
Follow the instructions below to perform a hexdump printout for the SNA
printing protocol:
1. Log in to the Axis Network Print Server by typing:
telnet <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Enable the Axis Network Print Server to hexdump mode by typing:
snahexdump
4. Select Start Logging from the Terminal menu in the Telnet window. Specify
a file name and select the folder where you want to save the file.
5. Start the print job.
6. When the print job is finished, select Stop Logging from the Terminal menu.
7. Enter the quit command
Replace the command in step 3 above with
and TN5250E protocols,
for the reverse Telnet protocol.
rtnhexdump
By typing in step 3 in any of the Telnet instruction sets above, a list
help
of all available commands will be displayed.
Management and Configuration
or
telnet <IP address>
tnehexdump
for the LPR/LPD protocol, or
lpdhexdump
in a DOS windows
and .)
root pass
for the TN3270E
139