Section 11 Configuration Possibilities; Autodetect Printer Type - Axis 5400plus User Manual

Configuration Possibilities
Section 11 Configuration Possibilities

Autodetect Printer Type

98
This section describes some configuration possibilities offered by the Axis
Network Print Server:
Autodetect Printer Type, on page 98
Changing Language in the Print Server's Web Interface, on page 108
E-mail Notification, on page 99
IPP (Internet Printing Protocol), on page 99
NetWare Packet Signature Levels, on page 108
TCP/IP Restrictions, on page 109
Enabling Secure Web Services — SSL/TLS, on page 110
The print server can automatically detect the type of printer you are using
if you enable Autodetect Printer Type. The print server can then
recognize Epson and Hewlett Packard InkJet printers. Most Epson and
Hewlett Packard InkJet printers that have Mac OS printer drivers for
network printing are supported. If Autodetect Printer Type is disabled, the
AppleTalk printer type has to be specified manually in the print server.
For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it would be
"DeskWriter". If the print server does not recognize the connected printer
the default setting, "LaserWriter" will be used as printer type.
"LaserWriter" is the recommended setting to be used with all PostScript
printers.
To enable Autodetect Printer Type, log in to your print server's Web
interface and select Admin | Network Settings | Detailed View |
Macintosh | Auto Detect Printer Type | Yes.
See the Help pages in the print server's Web interface for details.
AXIS 5400+ / AXIS 5600+ User's Manual