Table of Contents
Advertisement
1.3
Each board is carefully and thoroughly tested before being shipped. If,
however, problems should occur during the operation, please check your
user specific settings of all boards included in your system. This is often
the source of the fault. If a board is defective, it can be sent to your supplier
for repair. Please take care of the following steps:
-
The board returned should correspond to the factory default
settings since a test is only possible under these settings.
-
In order to repair your board as fast as possible, we require some
additional information from you. Please fill out the attached Repair
Form and include it with the defective board.
-
If possible, the board will be upgraded to the latest version without
additional cost.
-
Upon receipt of the board, please be aware that your user specific
settings were changes during the test.
Within the guarantee, the repair is free as long as the guarantee conditions
were kept. If no fault has been found, you will be charged with the test cost
due to the high test expenditure. Repairs outside of the guarantee will be
charged.
This KEM GmbH product is warranted against defects in material and
workmanship for our guaranteed warranty period from the date of
shipment. During the warranty period, KEM GmbH will, at its option, either
repair or replace products which prove to be defective.
For warranty service or repair, the product must be returned to a service
facility designated by KEM GmbH.
The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance or handling by buyer, unauthorized modification
or misuse, operation outside of the environmental specifications for the
product, or improper installation or maintenance.
KEM GmbH will not be responsible for any defects or damages due to a
faulty KEM GmbH product other than the products supplied by
KEM GmbH.
08.09.2004
Warranty
X-BOARD-UPA
Kontron Embedded Modules GmbH
Flatpanel Solutions
Marschnerstieg 7
22081 Hamburg / Germany
Fon: +49 (0)40 20 00 90-0
Fax: +49 (0)40 20 00 90-10
http://www.kontron-emea.com/flatpanel
3
Advertisement
Table of Contents
