2
Figure 8
NOTE
Insert the card with the card's gold contacts facing away from you, towards the
unit.
Loading Paper
Use the following steps to load a roll of 57mm x 40mm thermal printer paper into
Roll in the
the compartment.
Device
1
Figure 9
2
Figure 10
Remove the old card, if any, and install the MSAM card by carefully sliding it
into the slot (with the gold contacts facing downward) until fully inserted.
Insert Mini MSAM
Unlock the paper compartment by pulling up the latch and swinging the door
downwards.
Opening Printer Paper Door
Load the paper roll as shown in Figure 10, with the edge of the paper on the
top of the roll.
Procedure for Loading Paper Roll
D
S
EVICE
Loading Paper Roll in the Device
V210 I
G
NSTALLATION
UIDE
ETUP
19