User Manual V1.0-2022-10-30
3.4 Appearance
3.4.1 Parts
No.
Parts
1
DC Switch(optional)
2
PV Input Terminal
WiFi/LAN/4G Communication
3
Module Port
RS485/DRED/CT/Remote
4
Shutdown Communication
Cable Port(optional)
5
AC Output Terminal
6
PE Terminal
7
Indicator
Description
Optional. During normal operation it is in "on" state,
it can shut down the inverter after it is disconnected
from the grid by the AC breaker.
For Australia and New Zealand: With DC Switch.
Used to connect the PV module DC input cables.
• Connect a communication module like Bluetooth,
WiFi, LAN, 4G, etc. The module type may differ
depending on actual needs.
• Connect the USB-RS485 cable in Brazil.
• Update the software version of the inverter using
a USB flash driver.
Optional. Used to connect the RS485, DRED, CT, or
Remote Shutdown communication cable.
Used to connect the AC output cable, which connects
the inverter and the utility grid.
Used to connect the PE cable.
Indicates working state of the inverter.
7
03 Product Introduction