Manual Settings - Bernina Overlocker L 890 Workbook

My BERNINA

MANUAL SETTINGS

The Manual Settings Mode is prompted directly after a stitch is selected when in Expert Mode. This is the
screen that outlines all the physical changes that need to be made to the machine when setting up the stitch.
We will use a 4-thread overlock as our example.
The Wizard can be launched at any time from this screen by selecting the icon. This will walk you step-by-step
through all the changes that need to be made for the stitch selected.
Tip: The L 890 will remember the last stitch sewn, and the prompts work from these assumptions for the
suggested stitch changes.
Once all manual settings have been checked or changed, select the green check mark and the machine will move to the Stitch
View Screen.
Manual Setting Icons
Presser Foot
Recommendation
Looper Converter
Knife On/Off
Cutting Width
Micro Thread Control
B E R N I N A O V E R L O C K E R W O R K B O O K
Presser Foot Pressure
Upper Looper Position
Looper Insert
Rolled Hem Selection Lever
10
Needle Position