Stitch View - Bernina Overlocker L 890 Workbook

My BERNINA

STITCH VIEW

The Stitch View screen shows the electronic settings for each stitch, in addition to a few other important aspects of the stitch.
You can see the stitch number, name and a schematic or realistic view illustration of the basic stitch structure.
Electronic Settings
Thread Tension
The thread tension settings are easy to read across the top of the screen. In schematic view you will see both the number of
the tension setting, as well as the abbreviation for the thread. In realistic view, you will only see the number and color code—
no abbreviation. These numbers will start as recommended preset defaults for the stitch selected. When adjusted they will be
outlined in yellow.
There are two ways to adjust the thread tensions on the L 890. You can do this directly through the touch screen by touching
any tension button on the top of the touch screen and a new screen will open. Here you can use the electronic slider control
to set the tension. Touch and hold while moving the slider control to the desired setting.
For more control of the tension settings, use the fine adjustment buttons located the front of the machine (manual button).
Press the top button for a higher tension and the bottom button for a lower tension. This will move the tension in decimals of
1/10. Thread tension can be adjusted between 1-9 for each stitch. Changes made using the manual buttons will be reflected
on the screen.
B E R N I N A O V E R L O C K E R W O R K B O O K
11