Installing The Pv-A-300-10G-Ug I/O Module; Recommended Tools; Precautions - Extreme Networks Purview PV-A-300 Installation Manual

A
Electrical Hazard:
Riesgo Electrico:
instalacion.
Elektrischer Gefahrenhinweis:
qualifiziertes Personal vorgenommen werden.
Risques d'électrocution:
d'installation.
This appendix describes how to install the optional PV-A-300-10G-UG I/O module, which
has two 10G SFP+ interfaces, in a PV-A-300 Purview appliance.
NOTE
You must order the PV-A-300-10G-UG I/O module separately from the
PV-A-300 Purview appliance.
For information about...

Recommended Tools

Precautions

Installation Procedure
Recommended Tools
You may need the following items to perform the procedures in this section:
• Key to the system keylock
• #1 and #2 Phillips screwdrivers
• Wrist grounding strap
Precautions
For complete safety information, refer to the document Intel® Server Products Product
Safety and Regulatory Compliance available at the following sites:
http://download.intel.com/support/motherboards/server/sb/
•
g23122003_safetyregulatory.pdf
http://extranet.enterasys.com/downloads/Pages/NMS.aspx
•
CAUTION
Observe normal ESD (ElectroStatic Discharge) procedures to avoid possible
damage to system components.
Purview PV-A-300 Appliance Installation Guide
Installing the PV-A-300-10G-
UG I/O Module
Only qualified personnel should perform installation procedures.
Solamente personal calificado debe realizar procedimientos de
Installationen sollten nur durch ausgebildetes und
Seul un personnel qualifié doit effectuer les procédures
Refer to page...
31
31
32
31