Recording Processed Data - Simrad EK80 Harbour Acceptance Test

You can only choose from the channels that have already been installed. In
this context, the phrase channel is used as a common term to identify the
combination of transceiver, transducer and operating frequency.
c Select
Add
d Select
Apply
5 At the bottom of the
and close it.
Related topics
Testing the EK80 operational functionality, page 27
Secondary procedures, page 47

Recording processed data

The processed data recording function provided by the EK80 allows you to save
processed data on a selected format. The data files can be copied or moved to an external
storage device, or to another computer on the network. You can keep the recorded
files for scientific studies, future references or for training purposes. The recording is
controlled by the
Record Processed
Prerequisites
Before you start data recording, make sure that you have defined where to store the files.
To define which disks and folders to use to save the data files, use the
The page is located in the
File Setup
data on an external hard disk, make sure that it is connected to the Processor Unit.
Before you start recording, you must also define which output format(s) you wish to use.
To choose which processed data formats to record, select
Context
On the EK80, you can save and recall echo information using the following methods and
formats.
• Bitmap images (containing the full EK80 screen capture) are saved whenever you
select
Screen Capture
format on the Processor Unit hard disk. The
opens a dedicated viewer that allows you to open these images. In the viewer you
can also open the file folder on the Processor Unit hard disk. You can copy, rename
or delete the image files.
• Use
Record RAW
to select Replay mode.This mode allows you to replay previously recorded
Operation
data on the EK80. When in Replay mode, the EK80 is not able to transmit ("ping").
For this reason, the EK80 is inactive during playback.
401925/C
to save the output format.
to save your choices.
dialog box, select
Output
function.
Output
on the top bar. Each screen capture you make is saved in
on the menu to record raw data. To play back data, use
Operation
to save the chosen parameters
OK
dialog box. If you wish to save your recorded
Processed Data to File
Screen Captures
Secondary procedures
page.
File Setup
.
.jpg
tab on the bottom bar
59