Table of Contents
Advertisement
Procedure
1
Verify that the EK80 end-user manuals have been provided.
End-user documentation is provided on digital formats. All documentation related
to operation and installation can be downloaded from our website.
2
Verify that the applicable EK80 software media (USB flash disk, CD, DVD etc)
have been provided.
3
Verify that the operating system software license stickers is placed on the Processor
Unit.
4
Verify that the spare parts provided matches the order confirmation for the EK80
delivery.
5
Verify that the relevant software license codes are provided in a *.txt file on the
Processor Unit desktop.
Result
Requirements
All logistical items are available on board the vessel.
Date and signature:
Related topics
Customer acceptance form, page 46
Visual inspection of the display
A visual inspection of the EK80 display is required to verify that the unit has not been
physically damaged during the installation.
Prerequisites
The EK80 is installed as specified in the EK80 Installation manual. The EK80 is turned
off. You need the following equipment:
• Multimeter
Context
This test procedure is only applicable when the display is provided by Kongsberg
Maritime as a part of the EK80 delivery.
Procedure
1
Make sure that the unit's serial number has been recorded in the list of hardware
items.
2
Make sure that the physical installation of the unit has been completed.
401925/C
Visual inspections
Results
17
Advertisement
Table of Contents
