Rowenta ESPREMIO ES 6400 Manual page 14

• Before removing
remember to place the selector d1 in the
position "0".
• Fill the tank with cold water and fit it back
onto the appliance
• Switch on the appliance by pressing the
ON/OFF button d2.
• The LED flashes during preheating, then
remains lit.
The appliance is then ready for use.
For best results, we recommend warming up
ENG
the accessories beforehand (filter holder and
cups) without adding any ground coffee.
Proceed as follows:
• Fit the empty filter holder, and place the
espresso cups underneath it.
As soon as the appliance has reached the right
temperature, the orange LED stops flashing.
• Press the 2 cup or 1 cup button according to
what you require.
• Once the cup(s) are filled with hot water,
move the selector back to the "0" position
• Release the filter holder by pressing the
"EJECT" button lightly and turning it towards
(fig. 1)
the left
around the pod following the dotted lines
(fig. 12)
. Place the E.S.E pod with the red
writing facing downwards (fold the corners of
the filter paper back). Ensure that the paper is
placed inside the filter, otherwise this could
cause leaks. For creamier and thicker froth,
the E.S.E pod must be positioned correctly.
The pod is designed to make one cup of
coffee. The use of 2 E.S.E pods on top of one
another is not recommended.
• Insert the filter holder into the appliance
tightening it by turning it towards the right as
far as possible
• To prepare your espresso, follow the same
procedure as for the preparation of an
espresso with ground coffee.
With a soft pod
Your machine is also compatible with
soft pods (generally 60 mm in diameter).
As this type of pod is not specifically des-
igned for espresso machines, you will
obtain a weaker espresso than with an
E.S.E. pod.
• Before removing
remember to place the selector d1 in the
position "0".
the removable
(fig. 7 and 8)
.
. If required, remove the paper
(fig. 3).
the removable
tank, • Fill the tank with cold water and fit it back
onto the appliance
• Switch on the appliance by pressing the
ON/OFF button d2.
• The LED flashes during preheating, then
remains lit. The appliance is then ready for
use.
For best results, we recommend warming up
the accessories beforehand (filter holder and
cups) without adding any ground coffee.
Proceed as follows:
• Fit the empty filter holder, and place the
espresso cups underneath it. As soon as the
appliance has reached the right temperature,
the orange LED stops flashing.
• Press the 2 cup or 1 cup button according to
what you require.
• Once the cup(s) are filled with hot water,
move the selector back to the "0" position
• Release the filter holder by pressing the
"EJECT" button lightly and turning it towards
(fig. 1)
the left
holder. The pod is designed to make one cup
of coffee. The use of 2 pods on top of one
another is not recommended.
• Insert the filter holder into the appliance
tightening it by turning it towards the right
(fig. 3)
. The more it is compressed, the
stronger the espresso will be.
• To prepare your espresso, follow the same
procedure as for the preparation of an
espresso with ground coffee.
7. PREPARING THE STEAM
The steam is used to froth the milk (for example
when preparing cappuccinos or hot chocolate)
and heating water (for tea and other hot drinks).
• Turn the selector d1 to the position
(to obtain more steam, the temperature needs
to be higher than when making coffee).
• The ON/OFF button LED flashes again then
remains lit. The appliance is then ready for
use.
• Place the liquid to be heated into a recipient.
For best results, we recommend pouring the
liquid to be heated or frothed into a recipient
with a narrow neck (a small jug for example).
tank,
• Plunge the steam nozzle into the liquid.
• Turn the selector d1 to the position
(fig. 14)
: the steam pours into the liquid.
16
(fig. 7 and 8)
.
. Place a soft pod into the filter
(fig. 13)
(steam)