Fan / Blower Wiring Diagram - Oneida Air Systems Super Dust Gorilla 2hp Owner's Manual

XI. Wiring Diagram for Magnetic Starter (220v, 1 **)*
6' Long Type SJT
14 AWG Power Cord ( 2 / 2.5 / 3hp)
12 AWG Power Cord (5hp)
* Note: Motor Starter supplied with
system is for 220v only.
Note: This Dust Collector is pre-
wired at the factory and need only
be plugged into a NEMA 6020R
dedicated electrical recepyacle.
Optional Remote Controller diagram pg. 19
*Starter will not operate at any other voltages.
13
Baldor
TEFC
Motor
Note: Overload is preset at factory
However, if for some reason you need to set the over-
load, use the instructions below.
Combined Super Gorilla Owner's Manual © O.A.S. 2010
SFA = 12.1
+
(FLA = 11.5)