For Dual & Single Head Assembly - Felix printers FELIX Tec 4.1 Assembly Manual

Print Head
8.3 For Dual & Single head assembly
92
(2x) assemble fan ducts
95
Make sure nut is on the correct bolt
and check the orientation of the cables.
FELIX TEC 4.1
(2x) Slide dual fan into fan duct
93
NOTE: Sticker on fan should face
inwards
Tools:
(1x) M3 x 20 bolt
(1x) Lock nut M3
96
(1x) Mover
7
(1x) Main extruder bracket
3
Left fan duct
:
Parts Needed for fan duct
assembly:
94
(4x) M4 x 16 bolts
(2x) M4 thin nuts
Tools:
97
Overview of the assembly
2.5
Assembly Manual
21
30 November 2020
Right fan duct
www.FELIXprinters.com