Table of Contents
Advertisement
Upload Firmware
Upload Firmware
Download the Firmware:
Download the latest FELIX Tec 4 firmware version from:
https://www.felixprinters.com/downloads
Upload the Firmware to the Control Board:
1.
Unzip the downloaded file to a convenient location.
(Note: if you click on the zip file from within the Windows explorer, it will NOT be unzipped. You just view the content of the zip. You need to
select the files and drag them to the desired location.)
2. Connect your printer to your computer and turn it on. Do not make a connection at this time with the printer with programs like Repetier-Host
or Simplify3D.
3.
Start the batch file "upload_automatic.bat". A script will start in a command window.
4. The script will try to detect what COM port your printer is using. Check if this is correct, and then
proceed by entering 'Y' in the command window.
5.
The firmware is uploaded when ''Programming finished!'' is displayed, this may take a few minutes.
6. Press any key to continue. The FELIX TEC 4 firmware is now successfully uploaded.
Note for Experienced Users: Due to compatibility issues with linux based systems, the baudrate for all felixprinters are lowered to 115200. In case you
are used to older FELIXprinter models, make sure to adjust the settings in the used software accordingly.
FELIX TEC 4.1
Assembly Manual
29
30 November 2020
www.FELIXprinters.com
Advertisement
Table of Contents
