Emerson Rosemount 3308 Series Reference Manual page 85

Reference Manual
00809-0100-4308
commissioning, or at any time via AMS Wireless Configurator or a handheld
communicator. The Update Rate is user selectable from 4 seconds to 60 minutes.
Procedure
1. Select Configure → Guided Setup → Wireless Setup.
2. Select Configure Update Rate, and follow the instructions.
Postrequisites
Run Check Level Response to make sure that configured Update Rate is sufficient for the
application.
Related information
Consider optional setup
4.6.4 Obtain network ID and join key
In order to communicate with the Wireless Gateway, and ultimately the host system, the
transmitter must be configured to communicate on the wireless network. This step is the
wireless equivalent of connecting wires from a transmitter to the host system.
Reference Manual
Note
Set the Update Rate so that there is enough safety margin in the system for
high/low alerts. If the time between each update is too long, the high/low alerts
may be triggered too late.
Configuration
February 2020
85