Emerson Rosemount 3308 Series Reference Manual page 80

Configuration
February 2020
c) Browse to the downloaded DD files and select Ok.
Need help?
In the Add Device Type application, select the Help button for more information on how to
complete this operation.
Configure the HART
Before connecting to the device using a HART modem, the HART modem interface must
be configured in AMS Wireless Configurator.
Procedure
1. Close AMS Wireless Configurator.
2. Go to Start → Programs → AMS Device Manager and select Network
3. Select Add.
4. In the drop down list, select HART modem and then select Install.
5. Follow the on-screen instructions.
Need help?
In the Network Configuration application, select the Help button for more information on
how to complete this operation.
Configure the wireless network interface
Before connecting to the device wirelessly using a Wireless Gateway, the wireless network
must be configured in AMS Wireless Configurator.
Procedure
1. Close AMS Wireless Configurator.
2. Go to Start → Programs → AMS Device Manager and select Network
3. Select Add.
4. In the drop-down list select Wireless Network and then select Install.
5. Follow the on-screen instructions.
Need help?
In the Network Configuration application, select the Help button for more information on
how to complete this operation.
4.5.2 Handheld communicator
This section describes how to prepare the handheld communicator to communicate with
a Rosemount 3308 Series Transmitter. The handheld communicator can be used to
configure the device with a point-to-point connection. Connect the leads on the handheld
communicator to the communication terminals of the device.
80
®
Configuration.
Configuration.
modem interface
Reference Manual
00809-0100-4308
Rosemount 3308 Series