Emerson Rosemount 3308 Series Reference Manual page 210

Configuration parameters
February 2020
HART lock status
The state of HART write lock in the device.
Device information
Tag
Identifier for the device (max 8 characters) used by host systems. It is recommended to
enter both a short and a long tag (they may be the same).
Long tag
Identifier for the device (max 32 characters) used by host systems. It is recommended to
enter both a short and a long tag (they may be the same).
Descriptor
User's own description. Not required for operation of the device and can be left out if
desired.
Message
User's own information. Not required for operation of the device and can be left out if
desired.
Date
User's own information. Manufacturing date by default. Not required for operation of the
device and can be left out if desired.
Power
Performance mode
There are two performance modes: Standard and High Performance.
Table D-3: Performance Modes
Option
Standard
High performance
Power mode
Configures the device to take periodic measurements to conserve battery life, or to take
continuous measurements.
(3) In earlier versions, the performance modes are called High (Short battery life) and Normal (Long battery life).
210
Description
The standard performance mode is suitable for most applications, and
gives a long battery life.
The high performance mode is selectable only for transmitters with
profile code U. Each update is based on an increased number of
measurements (radar sweeps), which gives improved accuracy and
robustness, as well as decreased noise in the output value.
This mode also improves performance in difficult applications (e.g. foam,
turbulent surface, low dielectric constant) but reduces battery life.
Reference Manual
00809-0100-4308
(3)
Rosemount 3308 Series