Automatic Reference Optimisation - Fnc 04 - KERN CXB 3K0.2 Operating Instruction

13.4 Automatic reference optimisation - FnC 04

To optimize the calculated average piece weight automatically, add further parts
whose number is smaller than that of the first reference determination. For each
reference optimization the average piece weight is newly calculated. As the
additional pieces increase the base for the calculation, the reference also becomes
more exact.
00
Automatic reference optimisation is switched off
01
Automatic reference optimisation is switched on

In weighing mode press
the display appears

Press , in the display appears

Use the numeric keyboard to enter „04" and confirm by
entered as last will be displayed flashing.
• Use the numeric keyboard to enter the required setting and confirm by
• Return to weighing mode using
CXB-BA-e-1723
, and during display of "---------" press , in
, the value
.
47