Taring; Determination Of The Tare Weight By Weighing - KERN CXB 3K0.2 Operating Instruction

9 Taring

The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.

9.1 Determination of the tare weight by weighing

Place empty tare container on the weighing plate. The total weight of the container is
displayed.
6. 8 �

a
PRE-
TARE

Press button
After dead stop control was carried out, the display is reset to "0". The weight of the
container is now internally saved. The zero display and the arrow next to the "PRE-
TARE" symbol appear.

0. 0 ��
a
PRE-

TARE

Place the goods to be weighed into the tare container. Read the weight of the
goods on the display.
Note:
The balance is able to only store one taring value at a time.
When the balance is unloaded the saved taring value is displayed with negative
sign.
To delete the stored tare, unload the weighing plate and then press the TARE
key; the [ ] display next to "PRE-TARE" disappears.
The taring process can be repeated any number of times. The limit is reached when
the whole weighing range is exhausted.
32
0�
M+
0�
M+

CXB-BA-e-1723
0��
0