involight TRINITY200LED User Manual page 31

Channel
System
Display
Backlight Setting
Pan 0-255
Tilt 0-255
Dimmer 0-255
Strobe 0-255
Cyan 0-255
Magenta 0-255
Yellow 0-255
Color1 0-255
Color2 0-255
Color3 0-255
Fixed-Gobo 0-255
Rot-Gobo 0-255
Rot-Gobo 0-255
Rot
Effect 0-255
Prism1 0-255
Prism1 Rot 0-255
Prism2 0-255
Prism2 Rot 0-255
Effect 0-255
Focus 0-255
Prism1 0-255
Prism1 Rot 0-255
Prism 2 0-255
Prism 2 Rot 0-255
Language
Normal
Invert
Auto
Keep on
Factory Reset
Device TOU(Min)
Fans Voltage
Error record
About
"Channel control" operating mode
The "Manual control" mode can only be activated if the
device is working alone or is the master in a master-
slave combination. This setting is only relevant if the
device is not controlled by DMX.
a) Press the (Enter) key until "chanel control" is
displayed.
b) To select the desired parameter, press the ▲ (Up) or
▼ (Down) button.
c) Press (OK) to edit the values.
d) Press the ▲ (Up) or ▼ (Down) buttons to select the
value between "0" and "255".
e) Press the (OK) button to confirm and exit the menu.
f) Press the (Return) key to exit the selection without
saving.
Language selection
Invert display (for example in flight operations).
a) Press the (Enter) key until "Display" appears.
b) To select the desired mode, press the ▲ (Up) or ▼
(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Display lighting (The display goes dark after 15
seconds without pressing a button or is always on.)
a) Press the (Enter) key repeatedly until the display
shows "Settings".
b) Press the ▲ (Up) or ▼ (Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Reset to factory settings
Show device information
Fan voltage information
Error recording information
Displays the current software version
30