Ensure Your Own Safety - Jetter JetWeb JX2-IA4 Operator's Manual

JX2-IA4
1.1
Modifications and Alterations to the Module
For safety reasons, no modifications and changes to the JX2-IA4 module and its
functions are permitted. Any modifications to the module not expressly authorised by
the manufacturer will result in a loss of any liability claims to Jetter AG.
The original parts are specially designed for the JX2-IA4 module. Parts and
equipment of other manufacturers are not tested on our part, and are, therefore, not
released by us. The installation of such parts may impair the safety and the proper
functioning of the JX2-IA4 module.
For any damages resulting from the use of non original parts and equipment any
claims with respect to liability of Jetter AG are excluded.
Malfunctions
Information Signs and Labels
Jetter AG

Ensure Your Own Safety

Disconnect the JX-2 IA4 module from the mains to carry out maintenance
work. By doing so, you will prevent accidents resulting from electric voltage
and moving parts.
Safety and protective devices, e.g. the barrier and cover of the terminal
box must never be shunted or by-passed.
Dismantled protective equipment must be reattached prior to
commissioning and checked for proper functioning.
Malfunctions or other damages are to be reported to an authorised person
immediately.
Safeguard the JX2-IA4 module against misuse or accidental use.
Only qualified experts are allowed to carry out repairs.
Writings, information signs, and labels always have to be observed and
kept readable.
Damaged or unreadable information signs and labels are to be
exchanged.
1 Safety Instructions
9